Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
PRODUCT CATEGORIES
All Products
View:
Oxygen Acetylene 1500mm Welding Cutting Torch
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: G01-300
Oxygen Acetylene 1500mm Welding Cutting Torch A cutting torch consists of two hose connections: one for oxygen and one for acetylene, and either one or two shutoff valves. Some torches omit the oxygen shutoff valve at the hose connection, as the oxygen flow is also controlled by a mixing valve in a cutting torch. The...
American Type Cutting Long Tips
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: cx
American Type Cutting Long Tips Acetylene flows directly through this circuit from the cutoff valve. Oxygen flows through two circuits in the torch. One oxygen circuit flows through the aforementioned oxygen mixing valve and then into the torch's mixing chamber, from which it will leave through the torch tip mixed...
Welding and Cutting Torch Flashback Arrestor
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: cv
Welding and Cutting Torch Flashback Arrestor On the torch, the cutting tips are swappable, and change based on the thickness of material being cut. Using the right one greatly helps the finished quality of the cut. Tip size selection depends on the specific manufacturer and model of the torch. Changzhou EDAWELD...
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX004
PNM Gas Cutting Nozzle The PNM range of gas cutting nozzles are available in various sizes depending on the thickness of steel you are cutting, These PNM nozzles are a 2 piece nozzle which are used with oxygen and propane gases. Also known as Propane Nozzle Mix they have 3 machined seating faces and will fit most...
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX001
G02 ANME Gas Cutting Nozzle We are a prominent trader and supplier of superior quality Portable Gas Cutting Machine. Our vendors' engineers manufacture these machines using finest quality raw material and sophisticated technology. We make sure that all our machines are stringently checked on numerous parameters in...
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX023
106HC Gas Cutting Nozzle We make sure that all our machines are stringently checked on numerous parameters in accordance with the industry laid standards and norms. Also, we provide customization to our products as per the requirement of our clients. Clients can avail the offered range at market leading prices....
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX002
G03 PNME Gas Cutting Nozzle Being one of the leading manufacturers and suppliers of Portable Gas Cutting Machines, we ensure that the quality product is delivered to the customers. These products are suitable to cut different material such as iron, steel, mild steel and many others. Portable Gas Cutting Machines...
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX003
ANM Gas Cutting Nozzle The ANM range of gas cutting nozzles are available in various sizes depending on the thickness of steel you are cutting, These ANM nozzles are a solid 1 piece nozzle which are used with oxygen and acetylene gases. Also known as Acetylene Nozzle Mix they have 3 machined seating faces and will fit...
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX005
1-101 Type Gas Cutting Nozzle EDAWELD supplies an extensive range of cutting tips and nozzles suitable for your oxy-acetylene or oxy-LPG cutting applications. Buy your cutting tips and cutting nozzles online from EDAWELD today. Changzhou EDAWELD Trading Co.,LTD was established based on EDAWELD CO.,LTD main sales and...
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX006
1-GPN Gas Cutting Nozzle Complete oxy-fuel cutting and welding kit with accessories and cutting tipsIn recent years there`s been much discussion about the value of plasma-arc and laser processes for cutting and welding, but oxy-fuel is still the most commonly used method worldwide. Changzhou EDAWELD Trading Co.,LTD...
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX007
3-101 Type Gas Cutting Nozzle There are several thousand types of regular and specialty cutting tips and welding nozzles available. Some are designed to cut off the base of an I-beam or remove the head of a rivet. Other tips extend up to 24" from the torch. There are tips made to fit into awkward places or cut at odd...
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX008
3-GPN Gas Cutting Nozzle Step Method of Selecting the Right Cutting Tips Choosing the correct cutting tip for the job is critical to performance and safety. It`s easy when you use the 4-Step Method, but you need to understand these four things about your project and equipment: check Seat Type check Metal Thickness...
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX009
G1-A Gas Cutting Nozzle The thickness of the metal being cut is very important because the center hole of the cutting and gouging tip is sized to deliver the proper amount of oxygen at the proper pressure for a specific thickness. The pre-heat orifice is also sized to handle the proper amounts of mixed gas to heat a...
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX010
G1-P Gas Cutting Nozzle Determine the metal thickness you want to cut. Select the tip size rated to cut that thickness or beyond. The tip size is based on the cutting oxygen gas orifice (using drill index sizes) – not always the pre-heat orifices. Cutting oxygen gas orifice sizing is important so you may compare...
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX011
41 Type Gas Cutting Nozzle Select the tip style for the fuel gas you are using and metal type/condition. Cutting tip designs vary based on fuel gas and application. Examples: a 1 piece tip is typically used for oxygen-acetylene use and a 2 piece tip is used for oxygen-alternate fuel gas (natural gas, propane,...
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX012
41 Type Gas Cutting Nozzle The EDAWELD Cutting Tip Chart contains information on tip style/size selection, oxygen gas pressure settings (pre-heat flame and cutting stream), cutting oxygen gas orifice (center hole) sizing, fuel gas pressure settings, hose size recommendation, travel speed (machine cutting) and cut...
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX013
44 Type Gas Cutting Nozzle Most torch mixers use a "positive" design that requires fuel gas pressures set between 5-15 psi for cutting applications. However, some torches use an injector (low pressure) mixer design that only requires ¼ - 2 psi of alternate fuel gas. Always check with the manufacturer of your torch to...
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX014
6290 Type Gas Cutting Nozzle Most users of oxy-fuel cutting torches give little thought to the size of their cutting tips. Scrappers think bigger is better and high end production workers are more concerned with gas consumption costs rather than choosing the right tip for the job. The truth of the matter is, tip...
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX015
6290-NX Gas Cutting Nozzle Oxy fuel welding, also known as gas welding or oxyacetylene welding, is a process that uses oxygen and gases such as acetylene, propylene, or propane, to weld and cut metal. EDAWELD offers gas equipment to completely outfit your oxy fuel needs – including outfits, regulators, torches, tips...
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX016
6290-NH Gas Cutting Nozzle The first item is the type of torch being used in the process. The torch determines the design of the seating surface the cutting tip must have. The torch`s design also mandates the maximum oxygen flow. The oxygen flow determines the thickness of metal that can be cut. Note: Placing a...
6290NX Type Gas Cutting Nozzle
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX017
6290 Type Gas Cutting Nozzle The second item to consider is the fuel gas being used. Fuel gases have different burning rates, and the cutting tip must be designed to match the burning rate. The end of the cutting tip is recessed to match the type of fuel gas. Fuel gases also have different temperatures and BTU...
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX018
6290-VVC Type Gas Cutting Nozzle The third item to consider is the application. What is to be cut? What is the size of the cut? The material must be capable of being cut with the oxyfuel process. The cut size will determine the tip size needed. Manufacturers often provide literature that recommends the proper size tip...
6290 Small Type Gas Cutting Nozzle
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX019
6290 Type Gas Cutting Nozzle One-piece welding tips One-piece tips have (1) a cutting jet oxygen passage and (2) preheating flame passages. Acetylene tips are manufactured with four or six preheat holes and are produced to allow light, medium, and heavy preheats for use with clean, dirty, or rusted plate....
Brand: OEM/EDAWELD
Packaging: Carton
Supply Ability: 10000
Min. Order: 100 Piece/Pieces
Model No.: CX025
M Type Gas Cutting Nozzle To reach the temperature which is necessary for gas welding, only the combination oxygen / acetylene can be used. For this reason our combined welding and cutting torches are designed for the use with oxygen and acetylene. For cutting only also propane can be used as fuel gas. For the 2-tube...
Home > Products
Send Inquiry
Ms. YAO SHANSHAN
Tel:86-0519-85860058
Fax:86-0519-85860058
Mobile Phone:+8618961200813
Email:sandra_yao@edaweld.com
Address:No.382, Changhong East Road, Yaoguan Town, Wujin District, Changzhou City,Jiangsu, China, Changzhou, Jiangsu
Related Products List
Mobile Site
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.