Changzhou Edaweld Trading Company Limited

Products

Home > Products > Cutting Equipment > Cutting Torches

PRODUCT CATEGORIES

Cutting Torches

View:

    • Oxygen Acetylene Welding Cutting Torch

    Oxygen Acetylene Welding Cutting Torch

    • Brand: OEM/EDAWELD

    • Packaging: Carton

    • Supply Ability: 10000

    • Min. Order: 100 Piece/Pieces

    • Model No.: G01

    Oxygen Acetylene Welding Cutting Torch In oxy-acetylene welding, the "tool" used is not really the torch; it`s the flame. The torch should never touch thematerial being welded. The only purpose of the torch is to provide a gas mixture which will produce the flame bestsuited to the work to be done. Changzhou EDAWELD...

    • Oxy-acetylene Oxy-propane Welding torch

    Oxy-acetylene Oxy-propane Welding torch

    • Brand: OEM/EDAWELD

    • Packaging: Carton

    • Supply Ability: 10000

    • Min. Order: 100 Piece/Pieces

    • Model No.: H01

    Oxy-acetylene Oxy-propane Welding torch There are three distinct types of oxy-acetylene flames, usually termed:NeutralExcess Acetylene (or "carburizing")Oxidizing (or "excess oxygen" )The type of flame produced depends upon the ratio of oxygen to acetylene in the gas mixture which leaves the torch tip.The neutral...

    • Heavy Duty G02 Acetylene Cutting Torch

    Heavy Duty G02 Acetylene Cutting Torch

    • Brand: OEM/EDAWELD

    • Packaging: Carton

    • Supply Ability: 10000

    • Min. Order: 100 Piece/Pieces

    • Model No.: G02

    Heavy Duty G02 Acetylene Cutting Torch While flashback arrestors help prevent backfires and flashbacks in oxy fuel torches, no device replaces the necessity for safe operating practices and properly maintained oxy fuel torch equipment. Changzhou EDAWELD Trading Co.,LTD was established based on EDAWELD CO.,LTD main...

    • Thick Plate Used Heavy Duty Flame Cutting Torch

    Thick Plate Used Heavy Duty Flame Cutting Torch

    • Brand: OEM/EDAWELD

    • Packaging: Carton

    • Supply Ability: 10000

    • Min. Order: 100 Piece/Pieces

    • Model No.: G02250

    Thick Plate Used Heavy Duty Flame Cutting Torch Oxy-fuel flame cutting is a steel cutting process utilizing a chemical reaction between oxygen and the base metal at extreme temperatures. A single machine, equipped with multiple torches, can cut almost all grades of carbon and alloy steel plate. Oxy-fuel flame cutting...

    • Equal Pressure Welding Cutting Torch

    Equal Pressure Welding Cutting Torch

    • Brand: OEM/EDAWELD

    • Packaging: Carton

    • Supply Ability: 10000

    • Min. Order: 100 Piece/Pieces

    • Model No.: CX069

    Equal Pressure Welding Cutting Torch Oxy-fuel flame cutting applies to a variety of processes used to produce steel cut plates. Flame cut products range from simple shapes to intricate profiles. O'Neal Manufacturing Services provides detailed solutions to semi-finished parts through beveling, machining, punching,...

    • Acetylene Lengthen Welding Cutting Torch

    Acetylene Lengthen Welding Cutting Torch

    • Brand: OEM/EDAWELD

    • Packaging: Carton

    • Supply Ability: 10000

    • Min. Order: 100 Piece/Pieces

    • Model No.: H01-40

    Acetylene Lengthen Welding Cutting Torch Working with a flame: The safety considerations here are obvious: Keep the flame away from things you don't want to burn (including your flesh), watch out for flammable materials nearby, and remember that whatever you are heating / cutting / welding will become seriously hot...

    • Oxygen Acetylene 1500mm Welding Cutting Torch

    Oxygen Acetylene 1500mm Welding Cutting Torch

    • Brand: OEM/EDAWELD

    • Packaging: Carton

    • Supply Ability: 10000

    • Min. Order: 100 Piece/Pieces

    • Model No.: G01-300

    Oxygen Acetylene 1500mm Welding Cutting Torch A cutting torch consists of two hose connections: one for oxygen and one for acetylene, and either one or two shutoff valves. Some torches omit the oxygen shutoff valve at the hose connection, as the oxygen flow is also controlled by a mixing valve in a cutting torch. The...

    • American Type Cutting Long Tips

    American Type Cutting Long Tips

    • Brand: OEM/EDAWELD

    • Packaging: Carton

    • Supply Ability: 10000

    • Min. Order: 100 Piece/Pieces

    • Model No.: cx

    American Type Cutting Long Tips Acetylene flows directly through this circuit from the cutoff valve. Oxygen flows through two circuits in the torch. One oxygen circuit flows through the aforementioned oxygen mixing valve and then into the torch's mixing chamber, from which it will leave through the torch tip mixed...

    • Welding and Cutting Torch Flashback Arrestor

    Welding and Cutting Torch Flashback Arrestor

    • Brand: OEM/EDAWELD

    • Packaging: Carton

    • Supply Ability: 10000

    • Min. Order: 100 Piece/Pieces

    • Model No.: cv

    Welding and Cutting Torch Flashback Arrestor On the torch, the cutting tips are swappable, and change based on the thickness of material being cut. Using the right one greatly helps the finished quality of the cut. Tip size selection depends on the specific manufacturer and model of the torch. Changzhou EDAWELD...

China Cutting Torches Suppliers

Cutting Torches

The equipment and accessories for oxygas cutting are the same as for oxygas welding except that you use a cutting torch or a cutting attachment instead of a Welding Torch. The main difference between the cutting torch and the welding torch is that the cutting torch has an additional tube for high-pressure cutting oxygen. The flow of high-pressure oxygen is controlled from a valve on the handle of the cutting torch. In the standard cutting torch, the valve may be in the form of a trigger assembly like the one in figure 4-11. On most torches, the cutting oxygen mechanism is designed so the cutting oxygen can be turned on gradually. The gradual opening of the cutting oxygen valve is particularly helpful in operations, such as hole piercing and rivet cutting.



Figure 4-11.-One piece oxygas cutting torch.

Torch Body

Most welding torches are designed so the body of the torch can accept either welding tips or a cutting attachment. This type of torch is called a combination torch. The advantage of this type of torch is the ease in changing from the welding mode to the cutting mode. There is no need to disconnect the hoses; you just unscrew the welding tip and then screw on the cutting attachment. The high-pressure cutting oxygen is controlled by a lever on the torch handle, as shown in figure 4-12.



Figure 4-12.-Cutting attachment for combination torch.

Home > Products > Cutting Equipment > Cutting Torches

Send Inquiry

YAO SHANSHAN

Ms. YAO SHANSHAN

Tel:86-0519-85860058

Fax:86-0519-85860058

Mobile Phone:+8618961200813

Email:sandra_yao@edaweld.com

Address:No.382, Changhong East Road, Yaoguan Town, Wujin District, Changzhou City,Jiangsu, China, Changzhou, Jiangsu

Mobile Site

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send