Gas Cutting Nozzles

View:

6290-NX Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX015
6290-NX Gas Cutting Nozzle Oxy fuel welding, also known as gas welding or oxyacetylene welding, is a process that uses oxygen and gases such as acetylene, propylene, or propane, to weld and cut metal. EDAWELD offers gas equipment to completely outfit your oxy fuel needs – including outfits, regulators, torches, tips...

Contact Now
6290-NH Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX016
6290-NH Gas Cutting Nozzle The first item is the type of torch being used in the process. The torch determines the design of the seating surface the cutting tip must have. The torch`s design also mandates the maximum oxygen flow. The oxygen flow determines the thickness of metal that can be cut. Note: Placing a...

Contact Now
6290NX Type Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX017
6290 Type Gas Cutting Nozzle The second item to consider is the fuel gas being used. Fuel gases have different burning rates, and the cutting tip must be designed to match the burning rate. The end of the cutting tip is recessed to match the type of fuel gas. Fuel gases also have different temperatures and BTU...

Contact Now
6290-VVC Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX018
6290-VVC Type Gas Cutting Nozzle The third item to consider is the application. What is to be cut? What is the size of the cut? The material must be capable of being cut with the oxyfuel process. The cut size will determine the tip size needed. Manufacturers often provide literature that recommends the proper size tip...

Contact Now
6290 Small Type Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX019
6290 Type Gas Cutting Nozzle One-piece welding tips One-piece tips have (1) a cutting jet oxygen passage and (2) preheating flame passages. Acetylene tips are manufactured with four or six preheat holes and are produced to allow light, medium, and heavy preheats for use with clean, dirty, or rusted plate....

Contact Now
M Type Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX025
M Type Gas Cutting Nozzle To reach the temperature which is necessary for gas welding, only the combination oxygen / acetylene can be used. For this reason our combined welding and cutting torches are designed for the use with oxygen and acetylene. For cutting only also propane can be used as fuel gas. For the 2-tube...

Contact Now
L Type Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX026
L Type Gas Cutting Nozzle Welding tips from different manufacturers can be matched by orifice size; heating tips are matched by BTU output using the intended fuel gas. The welder must check the amount of fuel gas required to run the tip and be sure to provide sufficient gas to run the tip without backfires and...

Contact Now
SC12 Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX027
SC12 Gas Cutting Nozzle Cut base metal using an oxyacetylene cutting torch. Distinguish between a well cut surface and a poorly cut surface, and be able to adjust where necessary to perform a good cut. Describe the gouging process and state when it is used. Pass a test on safe practices and procedures while oxyfuel...

Contact Now
MC12 Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX028
MC12 Gas Cutting Nozzle In the US marketplace the four primary fuel gases are 1) acetylene, 2) propane, 3) natural gas, and 4) propylene. There are also some additives mixed with natural gas or propane that are supposed to improve cutting performance; however, these additives do not change the nozzle design for the...

Contact Now
SC-50 Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX029
SC-50 Gas Cutting Nozzle The acetylene nozzle has a flat front-face and no flame holding skirt. The flame velocity of acetylene is much higher than that of the other fuels and just the interaction between the flames of adjacent properly-placed preheat ports is sufficient to hold the flame on the face of the nozzle at...

Contact Now
MC40 Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX030
MC40 Gas Cutting Nozzle The proper preheat design must be chosen for the preheat gas being used as severe problems can occur by using the incorrect design. Use of acetylene in tips designed for NG/Propane or propylene can result in sustained burn-back or severe overheating of the tip/torch. Use of a non-acetylene gas...

Contact Now
GK1 Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX031
GK1 Gas Cutting Nozzle The common methods used in cutting metal are oxygas flame cutting, air carbon-arc cutting, and plasma-arc cutting. The method used depends on the type of metal to be cut and the availability of equipment. As a welder, oxygas or air carbon-arc equipment is the most common type of equipment...

Contact Now
GK3 Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX032
GK3 Gas Cutting Nozzle The oxygas cutting torch has many uses in steelwork Often, the welder finds the cutting torch an excellent tool for cutting ferrous metals. This versatile tool is used for operations, such as beveling plate, cutting and beveling pipe, piercing holes in steel plate, and cutting wire rope....

Contact Now
ST-8 LPG Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX033-1
ST-8 LPG Gas Cutting Nozzle When using the oxygas cutting process, you heat a spot on the metal to the kindling or ignition temperature (between 1400°F and 1600°F for steels). The term for this oxygas flame is the preheating flame. Next, you direct a jet of pure oxygen at the heated metal by pressing a lever on the...

Contact Now
Small Copy Type Machine Cut Tsui
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX034
Small Copy Type Machine Cut Tsui When you use the oxygas torch method to cut metal, the oxidation of the metal is extremely rapid and part of the metal actually burns. The heat, liberated by the burning of the iron or steel, melts the iron oxide formed by the chemical reaction and accelerates the preheating of the...

Contact Now
G07 Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX035
G07 Gas Cutting Nozzle In oxygas cutting, only that portion of the metal that is in the direct path of the oxygen jet is oxidized. The narrow slit, formed in the metal as the cutting progresses, is called the kerf. Most of the material removed from the kerf is in the form of oxides (products of the oxidation...

Contact Now
Copper CG07 Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX036
G07 Gas Cutting Nozzle The equipment and accessories for oxygas cutting are the same as for oxygas welding except that you use a cutting torch or a cutting attachment instead of a welding torch. The main difference between the cutting torch and the welding torch is that the cutting torch has an additional tube for...

Contact Now
G01 Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX037
G01 Gas Cutting Nozzle Most welding torches are designed so the body of the torch can accept either welding tips or a cutting attachment. This type of torch is called a combination torch. The advantage of this type of torch is the ease in changing from the welding mode to the cutting mode. There is no need to...

Contact Now
G07 Heavy Duty Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX038
G07 Gas Cutting Nozzle As in welding, you must use the proper size cutting tip if quality work is to be done. The preheat flames must furnish just the right amount of heat, and the oxygen jet orifice must deliver the correct amount of oxygen at just the right pressure and velocity to produce a clean cut. All of this...

Contact Now
G07-30 Gas Cutting Tsui
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX039
G07-30 Gas Cutting Tsui Each manufacturer makes many different types of cutting tips. Although the orifice arrangements and the tips are much the same among the manufacturers, the part of the tip that fits into the torch head often differs in design. Changzhou EDAWELD Trading Co.,LTD was established based on EDAWELD...

Contact Now
LPG Gas Cutting Nozzle
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX040
G07-30 Gas Cutting Tsui Because of these differences, there is the possibility of having two or three different types of cutting torches in your kits. Make sure that the cutting tips match the cutting attachment and ensure that the cutting attachment matches the torch body. Figure 4-13 shows the different styles of...

Contact Now
Brass LPG Japan Gas Cutting Tsui
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX041
Brass LPG Japan Gas Cutting Tsui To make clean and economical cuts, you must keep the tip orifices and passages clean and free of burrs and slag. If the tips become dirty or misshapen, they should be put aside for restoration. Figure 4-14 shows four tips: one that is repairable, two that need replacing, and one in...

Contact Now
Japan Type Brass Cutting Tip
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX042
Japan Type Brass Cutting Tip TIP MAINTENANCE.- In cutting operations, the stream of cutting oxygen sometimes blows slag and molten metal into the tip orifices which partially clogs them. When this happens, you should clean the orifices thoroughly before you use the tip again. A small amount of slag or metal in an...

Contact Now
G07-100 Natural Gas Cutting Tsui
- Brand: OEM/EDAWELD
- Packaging: Carton
- Supply Ability: 10000
- Min. Order: 100 Piece/Pieces
- Model No.: CX043
G07-100 Natural Gas Cutting Tsui Clean the orifices of the cutting torch tip in the same manner as the single orifice of the welding torch tip. Remember: the proper technique for cleaning the tips is to push the cleaner straight in and out of the orifice. Be careful not to turn or twist the cleaning wire. Figure 4-15...

Contact Now

China Gas Cutting Nozzles Suppliers

Cutting Torch Tips

As in welding, you must use the proper size cutting tip if quality work is to be done. The preheat flames must furnish just the right amount of heat, and the oxygen jet orifice must deliver the correct amount of oxygen at just the right pressure and velocity to produce a clean cut. All of this must be done with a minimum consumption of oxygen and fuel gases. Careless workers and workers not acquainted with the correct procedures waste both oxygen and fuel gas.

Each manufacturer makes many different types of cutting tips. Although the orifice arrangements and the tips are much the same among the manufacturers, the part of the tip that fits into the torch head often differs in design.

Because of these differences, there is the possibility of having two or three different types of Cutting Torches in your kits. Make sure that the cutting tips match the cutting attachment and ensure that the cutting attachment matches the torch body. Figure 4-13 shows the different styles of tips, their orifice arrangements and their uses. The tips and sears are designed to produce an even flow of gas and to keep themselves as cool as possible. The seats must produce leakproof joints. If the joints leak, the preheat gases could mix with the cutting oxygen or escape to the atmosphere, resulting in poor cuts or the possibility of flashbacks.

New Products