Tokinarc M6x70 Cucrzr Contact Tip

TOKINARC M6x70 Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

TOKINARC M6x70 Contact Tip Use the correct tip size. Using an oversized tip results in poor current transfer; increased microarcing; and hotter tip temperatures, which lead to wire burnback. Using an undersized tip increases friction and causes the wire to jam in the tip or feed erratically, which also results in wire...

Contact Now

TOKINARC M6x40 CuCrZr Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

TOKINARC M6x40 CuCrZr Contact Tip TOKINARC CuCrZr Contact Tip is good wear resistance, with good electrical conductivity, long time after use to maintain current, voltage stability, weld appearance, the service life is 2-3 times the general conductive mouth. The main areas of use for the shipbuilding, locomotives,...

Contact Now

TOKINARC 1.0mm E-Cu Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

TOKINARC 1.0mm E-Cu Contact Tip Q: How important is the Contact Tip in MIG welding? A: Very important. Make sure the gun tip isn`t worn out or that weld spatter is not on the tip near the exit hole. The contact tip in the gun should be perfectly round and just a few thousandths larger than the wire itself. Worn tips...

Contact Now

TOKINARC M6x40.5 Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

TOKINARC M6x40.5 Contact Tip Read your tip`s appearance for problems that you can`t necessarily see. A contact tip that has turned blue or purple is generally a sign that you have a poor connection (including the ground), your consumables are too big, or you have exceeded the torch`s amperage rating or duty cycle. In...

Contact Now

TOKINARC M6x45 Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

TOKINARC M6x45 Contact Tip Properly tighten the tip. A contact tip that has not been tightened down correctly causes poor current transfer, microarcing, and overheating. When this takes place you will most likely experience erratic wire feeding, poor arc starts, and burnback of the weld wire into the tip. OEM p/n...

Contact Now

TOKINARC Tapering M6x40 Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

TOKINARC Tapering M6x40 Contact Tip Once you`ve matched your contact tip to your welding application, there are a few things you can do to make sure you are getting the most out of it and not inadvertently creating problems that could decrease its life span or effectiveness. Let the torch cool before you change a...

Contact Now

TOKINARC Tapering 1.2mm Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

TOKINARC Tapering 1.2mm Contact Tip Silver-Plated CuCrZr Contact Tip Over the years technological advancements in contact tips have revealed that silver plating the interior and exterior of a CuCrZr tip further enhances its overall performance. When a contact tip begins to wear, the through-hole elongates and loses...

Contact Now

TOKINARC M8x30 Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

TOKINARC M8x30 Contact Tip Copper-Chrome-Zirconium Contact Tip (CuCrZr) A copper-chrome-zirconium tip generally is used in automated and robotic welding applications where precise TCP is needed and high duty cycles occur. Although there is some decline in electrical conductivity compared with the standard copper M8x30...

Contact Now

Binzel M10x35 CuCrZr Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Binzel M10x35 CuCrZr Contact Tip The position of the contact tip (extended or recessed) affects how long consumables last, along with how clean they stay. The farther the contact tip extends from the nozzle, the closer it is to the arc and the more prone it is to reflective heat. This can cause spatter accumulation...

Contact Now

Panasonic CuCrZr New Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Panasonic CuCrZr New Contact Tip Many people think of MIG gun consumables as simple throwaway items, but in reality these components are critical to welding performance and quality. They can also affect the productivity of a welding operation. MIG gun consumables should be cared for just the same as any other piece of...

Contact Now

Tweco 11-35 Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Tweco 11-35 Contact Tip Standard Copper Contact Tip (E-Cu) A standard copper Tweco Contact Tip has a relatively high current transfer rate at greater than 55 S/m* electrical conductivity, and it is used mostly in hand-held welding applications. Although standard copper offers the highest conductivity of all of the...

Contact Now

Tweco 14A CuCrZr Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Tweco 14A CuCrZr Contact Tip Contact tips are one of the most frequently misunderstood and most often replaced components of a welding gun setup. The Tweco 14A Contact Tip is responsible for guiding the wire and transferring the current from the conductor tube-sometimes referred to as a swanneck or gooseneck-through...

Contact Now