Changzhou Edaweld Trading Company Limited

Product Categories

Review
  • “I purchased this Plasma Tips 1 4 after looking at various of these products for some time. In the end they all looked to be much the same so I decided upon this one based on the price.”
    Khaled Mohemmed
    470Sailing
  • “The Plasma Tips 1 4 price is preferable with good condition,recommend.”
    Sujoy Poddar
    Geographics
  • “Thanks for fast delivery”
    Nasirin Sani
    3too
  • “These are PERFECT! You may purchase them with complete confidence!”
    Alejandro Theus
    310atable
  • “Good delivery make me surprise. The Plasma Tips 1 4 also seems great.”
    Bobby Gondoza
    Comeaux Caps

Plasma Tips 1 4

- manufacturer, factory, supplier from China

(Total 12 Products for Plasma Tips 1 4)

  • EWA140 EW A141 Air Cooled Plasma Cutting Torch

    EWA140 EW A141 Air Cooled Plasma Cutting Torch

    • Brand: OEM/EDAWELD
    • Packaging: Carton
    • Supply Ability: 1000
    • Min. Order: 1000 Piece/Pieces

    EWA140 EW A141 Air Cooled Plasma Cutting Torch Technical Date Standard Length:5M Air Pressure:4.5-5.5bar Duty Cycle 60%:140A Duty Cycle 100%:100A NO. Description Order Part No. EW A140/EW A141 Complete Torch EW A140/A141 Torch Head With Handle EW A140 Torch Head A140 EW PF0155 EW A141 Torch Head A141 EW PF0101 O-Ring...

    Contact Now

  • 220V Inverter Air Plasma Cutting Machine CUT-40

    220V Inverter Air Plasma Cutting Machine CUT-40

    • Brand: OEM/EDAWELD
    • Packaging: Carton
    • Supply Ability: 1000
    • Min. Order: 50 Set/Sets

    220V Inverter Air Plasma Cutting Machine CUT-40 Cut40 Plasma Machine High speed, high efficiency, low cost cutting.220V Cut40 Plasma Cutter The use of advanced IGBT, MOSFET and other imported power devices, PWM pulse width regulation technology, carefully manufactured, efficient energy-saving, power frequency noise...

    Contact Now

  • AC12V 24V Plasma Cutter Solenoid Valve

    AC12V 24V Plasma Cutter Solenoid Valve

    • Brand: OEM
    • Packaging: CARTON
    • Supply Ability: 10000
    • Min. Order: 100 Piece/Pieces

    AC12V 24V Plasma Cutter Solenoid Valve Solenoid valve coil burned, can remove the solenoid valve wiring, with a multimeter to measure, if open, then the solenoid valve coil burned. Because there is a coil damp, causing poor insulation and leakage of magnetic, resulting in coil current is too large and burned, so to...

    Contact Now

  • A140 A141 Air Cooled Plasma Cutting Torch

    A140 A141 Air Cooled Plasma Cutting Torch

    • Brand: OEM/EDAWELD
    • Packaging: Carton
    • Supply Ability: 10000
    • Min. Order: 1000 Piece/Pieces

    A140 A141 Air Cooled Plasma Cutting Torch Technical Data Standard Length: 5M Air Pressure: 4.5-5.5bar Duty Cycle 60%: 140A Duty Cycle 100%: 100A Changzhou EDAWELD Trading Co.,LTD was established based on EDAWELD CO.,LTD main sales and export welding machines, welding wires, welding and cutting torches and spare parts...

    Contact Now

  • S45 Aired Cooled Plasma Cutting Torch

    S45 Aired Cooled Plasma Cutting Torch

    • Brand: OEM/EDAWELD
    • Packaging: Carton
    • Supply Ability: 10000
    • Min. Order: 1000 Piece/Pieces

    S45 Aired Cooled Plasma Cutting Torch Technical Data Standard Length: 5M Air Pressure: 4.5-5.5bar Duty Cycle 60%: 140A Changzhou EDAWELD Trading Co.,LTD was established based on EDAWELD CO.,LTD main sales and export welding machines, welding wires, welding and cutting torches and spare parts and Pneumatic tools. From...

    Contact Now

  • PB-S45W Plasma Cutting Nozzle and Electrode

    PB-S45W Plasma Cutting Nozzle and Electrode

    • Brand: OEM/EDAWELD
    • Packaging: Carton
    • Supply Ability: 10000
    • Min. Order: 1000 Piece/Pieces

    PB-S45W Plasma Cutting Nozzle and Electrode It`s very important to replace consumables routinely, especially as you see that pit depth increase, the orifice widen, or slag build up on the shield. Besides replacing the consumables, you need to perform regular maintenance on the torch, such as replacing the torch leads...

    Contact Now

  • SUPER 400 Plasma Cutting Nozzle and Electrode

    SUPER 400 Plasma Cutting Nozzle and Electrode

    • Brand: OEM/EDAWELD
    • Packaging: Carton
    • Supply Ability: 10000
    • Min. Order: 1000 Piece/Pieces

    SUPER 400 Plasma The shield protects the rest of the consumables. With the plasma cutting process you tend to get an awful lot of sparks and molten metal. The shield`s purpose is to prevent that from reaching the inner consumables. In some cases, the shield is a drag shield, which means it allows the operator to put...

    Contact Now

  • SUPER 400 PLUS Plasma Cutting Consumables

    SUPER 400 PLUS Plasma Cutting Consumables

    • Brand: OEM/EDAWELD
    • Packaging: Carton
    • Supply Ability: 10000
    • Min. Order: 1000 Piece/Pieces

    SUPER 400 PLUS Plasma Cutting Consumables For most manual plasma cutting systems, five different components comprise the torch consumables-the shield, retaining cap, nozzle, electrode, and swirl ring. NO. Order Part No. Description 1 EW 40016362 Nozzle 1.7mm L

    Contact Now

  • PART NO.A141 PR0101 ELECTRODE

    PART NO.A141 PR0101 ELECTRODE

    • Min. Order: 1000 Piece/Pieces
    • Model No.: PR0101
    • Place of Origin: china
    • Transportation: Ocean,Air

    The electrode is usually made of copper, but with a metal insert at the point where the arc attaches. That`s because the copper would melt too fast if the arc attached directly to it. Tungsten makes a great electrode material, so lots of electrodes have a tungsten insert. Some smaller torches use a `pencil` style...

    Contact Now

  • A141 PD0101-11 NOZZLECOOLED PLASMA

    A141 PD0101-11 NOZZLECOOLED PLASMA

    • Min. Order: 1000 Piece/Pieces
    • Model No.: PD0101-11
    • Place of Origin: china
    • Transportation: Ocean,Air

    We are reputed enterprises in this industry, offering a wide gamut of Plasma Cutting Torch Nozzle. This cutting torch nozzle is designed by our experts using the premium grade material and sophisticated machinery in line with the international quality standards. Offered cutting torch nozzle is used in mechanical...

    Contact Now

  • A-141 Air Cooled Plasma Cuting Torch

    A-141 Air Cooled Plasma Cuting Torch

    • Min. Order: 1000 Piece/Pieces
    • Model No.: A-141
    • Place of Origin: china
    • Transportation: Ocean,Air

    A-141 Air Cooled Plasma Cuting Torch FAQ Q1: Can I get a samples to check the quality? A:Sure,we can supply samples. For regular goods, the sample cost is different from the amount you want.For our new products, there's a MOQ of the samples. Q2: Can I put my logo on the boxes/cartons? A: Yes, this can be made...

    Contact Now

  • SUPER400 Compatible Parts for KOIKE

    SUPER400 Compatible Parts for KOIKE

    • Min. Order: 1000 Piece/Pieces
    • Model No.: SUPER400
    • Place of Origin: china
    • Transportation: Ocean,Air

    SUPER400 Compatible Parts for KOIKE NO. Order Part No. Description 1 EW PK031336 Shield 2 Nozzle 2.1mm L Nozzle 2.1mm R EW PK030067 Nozzle 2.3mm L

    Contact Now

High Quality Products

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Home > Plasma Tips 1 4

Send Inquiry

YAO SHANSHAN

Ms. YAO SHANSHAN

Tel:86-0519-85860058

Fax:86-0519-85860058

Mobile Phone:+8618961200813

Email:sandra_yao@edaweld.com

Address:No.382, Changhong East Road, Yaoguan Town, Wujin District, Changzhou City,Jiangsu, China, Changzhou, Jiangsu

Mobile Site

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send