M10x40 Cucrzr Contact Tip

Fronius M10x40 CuCrZr Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Fronius M10x40 CuCrZr Contact Tip In many cases, MIG gun consumables may be an afterthought in the welding process, as concerns with equipment, workflow, part design and more dominate the attention of welding operators, supervisors and others involved in the operation. Yet, these components - particularly contact tips...

Contact Now

Binzel M10x35 CuCrZr Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Binzel M10x35 CuCrZr Contact Tip The position of the contact tip (extended or recessed) affects how long consumables last, along with how clean they stay. The farther the contact tip extends from the nozzle, the closer it is to the arc and the more prone it is to reflective heat. This can cause spatter accumulation...

Contact Now

Panasonic CuCrZr New Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Panasonic CuCrZr New Contact Tip Many people think of MIG gun consumables as simple throwaway items, but in reality these components are critical to welding performance and quality. They can also affect the productivity of a welding operation. MIG gun consumables should be cared for just the same as any other piece of...

Contact Now

TOKINARC M6x40 CuCrZr Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

TOKINARC M6x40 CuCrZr Contact Tip TOKINARC CuCrZr Contact Tip is good wear resistance, with good electrical conductivity, long time after use to maintain current, voltage stability, weld appearance, the service life is 2-3 times the general conductive mouth. The main areas of use for the shipbuilding, locomotives,...

Contact Now

TOKINARC M6x40.5 Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

TOKINARC M6x40.5 Contact Tip Read your tip`s appearance for problems that you can`t necessarily see. A contact tip that has turned blue or purple is generally a sign that you have a poor connection (including the ground), your consumables are too big, or you have exceeded the torch`s amperage rating or duty cycle. In...

Contact Now

TOKINARC M6x45 Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

TOKINARC M6x45 Contact Tip Properly tighten the tip. A contact tip that has not been tightened down correctly causes poor current transfer, microarcing, and overheating. When this takes place you will most likely experience erratic wire feeding, poor arc starts, and burnback of the weld wire into the tip. OEM p/n...

Contact Now

TOKINARC M6x70 Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

TOKINARC M6x70 Contact Tip Use the correct tip size. Using an oversized tip results in poor current transfer; increased microarcing; and hotter tip temperatures, which lead to wire burnback. Using an undersized tip increases friction and causes the wire to jam in the tip or feed erratically, which also results in wire...

Contact Now

TOKINARC M8x30 Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

TOKINARC M8x30 Contact Tip Copper-Chrome-Zirconium Contact Tip (CuCrZr) A copper-chrome-zirconium tip generally is used in automated and robotic welding applications where precise TCP is needed and high duty cycles occur. Although there is some decline in electrical conductivity compared with the standard copper M8x30...

Contact Now

Tweco 11-35 Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Tweco 11-35 Contact Tip Standard Copper Contact Tip (E-Cu) A standard copper Tweco Contact Tip has a relatively high current transfer rate at greater than 55 S/m* electrical conductivity, and it is used mostly in hand-held welding applications. Although standard copper offers the highest conductivity of all of the...

Contact Now

Tweco 14A CuCrZr Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Tweco 14A CuCrZr Contact Tip Contact tips are one of the most frequently misunderstood and most often replaced components of a welding gun setup. The Tweco 14A Contact Tip is responsible for guiding the wire and transferring the current from the conductor tube-sometimes referred to as a swanneck or gooseneck-through...

Contact Now

Tweco 17S Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Tweco 17S Contact Tip contact tip recess are available with MIG gun consumables: fixed or adjustable. Because an adjustable contact tip recess can be changed to varying ranges of depth and extensions, they have the advantage of being able to meet the recess demands of different applications and processes. However,...

Contact Now

Tweco M8x37 Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Tweco M8x37 Contact Tip The diffuser, the tip and the nozzle are the three primary parts that comprise MIG gun consumables. The diffuser attaches directly to the gun neck and carries current through to the contact tip and directs the gas into the nozzle. The tip connects with the diffuser and transfers the current to...

Contact Now