Kemppi M8x35 1 2mm Contact Tip

Kemppi M8X35 CuCrZr 1.2mm Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Kemppi M8X35 CuCrZr 1.2mm Contact Tip The Kemppi M8X35 CuCrZr Contact Tip is a very important part of the torch and the welding process. Even slight changes in the tip including the ID, roundness, cleanness, etc., can have a significant impact on the quality and consistency of a weld. Make sure you choose the correct...

Contact Now

Fronius M8x35 AL Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Fronius M8x35 AL Contact Tip In a MIG welding process, the contact tip is responsible for transferring the welding current to the wire as it passes through the bore, creating the arc. Optimally, the wire should feed through with minimal resistance while still maintaining electrical contact. The position of the contact...

Contact Now

G1-P Gas Cutting Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 100 Piece/Pieces

G1-P Gas Cutting Nozzle Determine the metal thickness you want to cut. Select the tip size rated to cut that thickness or beyond. The tip size is based on the cutting oxygen gas orifice (using drill index sizes) – not always the pre-heat orifices. Cutting oxygen gas orifice sizing is important so you may compare...

Contact Now

41 Type Gas Cutting Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 100 Piece/Pieces

41 Type Gas Cutting Nozzle Select the tip style for the fuel gas you are using and metal type/condition. Cutting tip designs vary based on fuel gas and application. Examples: a 1 piece tip is typically used for oxygen-acetylene use and a 2 piece tip is used for oxygen-alternate fuel gas (natural gas, propane,...

Contact Now

Binzel 14AK M5x18 Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Binzel 14AK M5x18 Contact Tip To stabilize the current to the arc area, install a copper 14AK M5x18 Contact Tip at the output of the welding torch. It can increase the service life of the contact tip, enhance the stability of the welding process, and improve the ability to conduct current. According to the different...

Contact Now

Binzel 15AK M6x25 Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Binzel 15AK M6x25 Contact Tip Binzel M6x25 Contact Tip use in Binzel type 15ak welding torches. We supply E-Cu and uCrZr material MIG WELDING Contact Tips to meet the urgent and ever-growing requirements of the welding industry at most competitive Prices. We invite your enquiries with drawings, samples or part number...

Contact Now

Binzel M10x35 CuCrZr Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Binzel M10x35 CuCrZr Contact Tip The position of the contact tip (extended or recessed) affects how long consumables last, along with how clean they stay. The farther the contact tip extends from the nozzle, the closer it is to the arc and the more prone it is to reflective heat. This can cause spatter accumulation...

Contact Now

Panasonic 1.2mm E-Cu Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Panasonic 1.2mm E-Cu Contact Tip Welding guns for MIG welding are available for manual manipulation (semiautomatic welding) and for machine or automatic welding.Because the electrode is fed continuously, a welding gun must have a sliding electrical contact to transmit the welding current to the electrode. The gun must...

Contact Now

TOKINARC 1.0mm E-Cu Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

TOKINARC 1.0mm E-Cu Contact Tip Q: How important is the Contact Tip in MIG welding? A: Very important. Make sure the gun tip isn`t worn out or that weld spatter is not on the tip near the exit hole. The contact tip in the gun should be perfectly round and just a few thousandths larger than the wire itself. Worn tips...

Contact Now

TOKINARC Tapering 1.2mm Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

TOKINARC Tapering 1.2mm Contact Tip Silver-Plated CuCrZr Contact Tip Over the years technological advancements in contact tips have revealed that silver plating the interior and exterior of a CuCrZr tip further enhances its overall performance. When a contact tip begins to wear, the through-hole elongates and loses...

Contact Now

Tweco 11-35 Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Tweco 11-35 Contact Tip Standard Copper Contact Tip (E-Cu) A standard copper Tweco Contact Tip has a relatively high current transfer rate at greater than 55 S/m* electrical conductivity, and it is used mostly in hand-held welding applications. Although standard copper offers the highest conductivity of all of the...

Contact Now

Tweco 11H35 E-Cu Contact Tip

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Tweco 11H35 E-Cu Contact Tip Tweco E-Cu Contact Tip size determines what wire size you can use and the amount of filler material that will be distributed during welding. When a contact tip begins to wear, the through-hole elongates and loses electrical conductivity, which greatly affects the gun`s ability to transfer...

Contact Now