12 Holes Laser Nozzle

MITSUBISHI 12 Holes Laser Nozzle

• Brand: OEM/EDAWELD
• Packaging: Box
• Supply Ability: 1000
• Min. Order: 10 Piece/Pieces

MITSUBISHI 12 Holes Laser Nozzle 12 Holes Laser Nozzle Nozzle shape, nozzle diameter, MITSUBISHI 12 Holes Laser Nozzle height (nozzle outlet and the workpiece surface distance), etc., will affect the cutting effect. The role of the nozzle (1) to prevent welding and other debris up bounce, through the nozzle, pollution...

Contact Now

Amada Fiber WACS Laser Cutting Nozzles 71712335

• Brand: OEM/EDAWELD
• Packaging: Box
• Supply Ability: 1000
• Min. Order: 10 Piece/Pieces

Amada Fiber WACS Laser Cutting Nozzles 71712335 Amada Fiber WACS Laser Cutting Nozzles If the cutting speed is too fast, the following consequences may be caused. 1) may not be able to cut through, sparks spray. 2) Some areas can be cut through, but some areas can not be cut through. 3) the whole section is thick, but...

Contact Now

SC12 Gas Cutting Nozzle

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 100 Piece/Pieces

SC12 Gas Cutting Nozzle Cut base metal using an oxyacetylene cutting torch. Distinguish between a well cut surface and a poorly cut surface, and be able to adjust where necessary to perform a good cut. Describe the gouging process and state when it is used. Pass a test on safe practices and procedures while oxyfuel...

Contact Now

MC12 Gas Cutting Nozzle

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 100 Piece/Pieces

MC12 Gas Cutting Nozzle In the US marketplace the four primary fuel gases are 1) acetylene, 2) propane, 3) natural gas, and 4) propylene. There are also some additives mixed with natural gas or propane that are supposed to improve cutting performance; however, these additives do not change the nozzle design for the...

Contact Now

H07-12 Gas Cutting Nozzle

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 100 Piece/Pieces

H07-12 Gas Cutting Nozzle Based on the comparison and theoretical discussion of propane gas, propylene gas and acetylene gas, the characteristics of high efficiency and low cost of propane gas for cutting and the characteristics of safety and environmental protection are clarified. Propane gas for steel plate cutting,...

Contact Now

Fronius Gas Nozzle 42.0001.5174

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Fronius Gas Nozzle 42.0001.5174 As with any front-end consumable, nozzles play an important role in maintaining good weld quality and can have a measurable impact on productivity and costs, too. Take the time to select the right ones for each application and maintain them properly. Careful selection and maintenance...

Contact Now

Fronius 42.0001.5128 Welding Nozzle

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Fronius 42.0001.5128 Welding Nozzle Selecting the Right Shape ofFronius 42.0001.5128 Gas Nozzle Nozzle 
 There are several shapes of nozzles available, including straight, bottleneck and short or long taper nozzles. Straight nozzles typically have larger inside diameters (e.g., 3/4 inch), but don`t offer as good of...

Contact Now

Fronius 42.0001.5129 15mm Welding Nozzle

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Fronius 42.0001.5129 15mm Welding Nozzle Welding accessories and spare parts from tips and nozzles, gas hose and welding cable to balancers, chalk, chipping hammers, connectors, earth clamps, & tip cleaners. National Welding has a wide variety of welding accessories and spare parts, with everything you could...

Contact Now

Fronius 42.0001.5127 20mm Welding Nozzle

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

Fronius 42.0001.5127 20mm Welding Nozzle MIG/MAG welding torches from Fronius offer the advanced technology and quality that let you concentrate on the job in hand, whatever it might be, rather than the equipment. All welding torches are designed to the last detail to guarantee precise results and ease of use. Design...

Contact Now

KOIKE 120 Plasma Cutter Nozzle and Electrode

• Brand: OEM/EDAWELD
• Packaging: Carton
• Supply Ability: 10000
• Min. Order: 1000 Piece/Pieces

KOIKE 120 Plasma Cutter Nozzle and Electrode As you use the electrode, the hafnium/tungsten becomes molten and pieces of it start to blow out through the nozzle as you cut. It develops a pit at the front of the electrode. Once that pit depth is over 1⁄32, it`s time to change the consumable. NO. Order Part No....

Contact Now

A81-PD0105-12 Nozzle for Trafimet plasma

• Brand: OEM/EDAWELD
• Packaging: carton
• Supply Ability: 1000
• Min. Order: 1000 Piece/Pieces

A81-PD0105-12 Nozzle for Plasma Welding FAQ Q1: Can I get a samples to check the quality? A:Sure,we can supply samples. For regular goods, the sample cost is different from the amount you want.For our new products, there's a MOQ of the samples. Q2: Can I put my logo on the boxes/ca

Contact Now

A81 PD0106-12 Plasmsa Nozzle Tip 1.2mm

• Brand: OEM/EDAWELD
• Packaging: carton
• Supply Ability: 1000
• Min. Order: 1000 Piece/Pieces

A81 PD0106-12 Plasmsa Nozzle Extended Tip 1.2mm FAQ Q1: Can I get a samples to check the quality? A:Sure,we can supply samples. For regular goods, the sample cost is different from the amount you want.For our new products, there's a MOQ of the samples. Q2: Can I put my logo on the boxes/cartons? A: Yes, this can be...

Contact Now